We Are One Enterprises Pvt Ltd

call 022- 49195555 | mail
call 022- 49195555 | mail
  1. Item 1
  2. Item 2
SVG cover layer an animated layer to switch from one slide to the next one

Our Services

Services 1

Cut to length / Cut & Bend Steel

We offer solutions by giving steel reinforcement bars exactly cut to length as well as cut & Bend, as per the Bar bending schedule provided by customer. We are dealer for Arcelor Mittal steel which is worlds largest producer of steel which offers best quality in market & the rate is marginally higher from the rolling mills and much lower than the main producers like Tata, Sail, Jindal. We also supply material of Tata, Sail, Jindal, Essar and all the rolling mills located in Wada, Pune, Jalna, Nashik , Kolhapur . We can supply TMT Bars to all states of India.

By using cut to length steel, end user can save on:

1. Wastages
2. Site Handing Cost
3. No Pilferage & theft.
4. Enables buyer to reconcile that exact steel usage without assumptions.

We also deal in other M.S. Steel products such as TMT Bars, Angle, Unequal Angle, Channel, Beam, Flats, H.R. Plates/sheets & C.R. Sheets, GP Sheets/Coils & GC Sheets etc. To know more about these products please visit our website www.sandeepsteels.com.

Services 1

Gypsum Apply and Supply

We also take on a contract, basic application of gypsum for the entire project. This facilitates assurance of consistent quality and release the client from management of labour, Maintaining Stock , Controlling wastages etc.

How we work.:

On request for quotation, we will arrange the site visit by our technical person who will understand the actual need and quality criteria.

We understand what are the resources provided by the customers and then we understand what is our scope of work and the payment terms and conditions and based on that we provide our best prices for apply supply.

Ready Mix Plaster (Sprayable)

Product Description:
Ready Mix Plaster (Sprayable) is a polymer modified premixed cement based plaster. It is convenient, easy to use, strong and binds better to its substrate. It provides an even surface on which tiling can be done faster & efficiently.

For interior and exterior walls through spray plaster machines.


  • High Bond Strength
  • Crack Free Wall
  • Faster Application
  • Excellent Coverage
  • Easy to use
  • Economical
  • Premixed

Suitable Substrates:

  • AAC Block/Concrete Block
  • Red Clay Bricks
  • Cement Mortar Blocks/Bricks
  • Concrete Hollow Blocks
  • Cellular Concrete Blocks
  • Stone Walls
  • Fly Ash Bricks

Packaging: 40 kg bag

Colour: Greyish Granular Powder

Coverage is based on smoothness and evenness of the substrate, type of masonry work and the thickness of mortar used.

A coverage of 15-18 Sq. Ft. per bag of 40 Kg is received when applied with a thickness of 10-12 mm

Shelf Life:
Factory packed bags of Ready Mix Plaster carries a shelf life of 6 months, if stored in cool & dry place. However, as temperature, humidity, water addition & other parameters vary from site to the information should be treated as a general guideline.


  • Ready Mix Plaster (Sprayable) is not a replacement for waterproof membranes. When a waterproof membrane is required, use a different product for the same.


  • During cold weather, protect finished work from use until fully cured.
  • Contains Portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water at least for 15 minutes and seek medical help if burning continues.
  • Do not take internally. Silica Sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas.
  • Keep out of reach of children


Performance Properties:

Ready Mix Plaster mixed with water:



Compressive Strength

>9.0 MPa

Flexural Strength

>2.0 MPa

Working Properties:

Initial/Final Setting Time

250/295 Mins.

Water Retentivity

Min. 99%

Dry Density

1910 kg/m3

Specifications are subject to change without notification. Results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site conditions


Surface Preparation:
The application surface/substrate must be free from loose particles or any other foreign material prior to commencement of work/application of any Magicrete products. Pre-wet or dampen surface with good quality fresh water, if necessary.

Apply the plaster to surface using a spray plaster machine. Finish the wall using feather edge level strip and muster.

The thickness of each coat should not exceed 15 mm.

READY MIX PLASTER (SPRAYABLE), is free from manufacturing defects and will not break down, deteriorate or disintegrate under normal usage for a period of six (6) months from date of manufacture, subject to the terms and conditions stated in Product Warranty.

For demo video of spray plaster please click here

Send an enquiry